Features:
1. Private model products
2. The sealing level reaches the IP54, and the first floor is completely sealed. In the use, the dust and smoke oil can be avoided into the chassis, so that the life and brightness of the extended laser can be extended.
3. The heat dissipation layer is on the 2nd floor. The overall heat sink is combined with the laser light source, and the heat dissipation area reaches 100%, which extend the life of the laser.
Laser power: | 10W [Red: 3W 638nm; Green: 3W 520nm; Blue: 4W 445nm] |
Cooling method: | the whole machine is cooled by air cooling |
Control signal mode: | TTL/analog automatic switching Modulation |
modulation voltage: | ≦100K |
Laser divergence angle: | <1.2mrad (full -angle) |
Laser spot size: | 5*6.2mm at the light outlet |
Galvanometer: | AT35S 35kpps galvanometer high-quality dielectric film reflectance >99% @45°incidence (covered wavelength: 400nm-680mm) |
Scan angle: | up to 60° |
Laser service life: | ≥10000 hours (test results in the constant temperature environment) |
Laser level: | Class IV |
IP rate: | IP54 |
Control mode: | SD (built-in more than 200 effects), sound control, automatic operation, DMX 18/27 channels, master/slave mode, ILDA software control |
Back control: | AT-S5 LCD, 3-pin 512 in/out, DB25 in/out, key switch, remote in/out, power in/out, fuse |
Work temperature: | -10C-45 ° C |
Voltage: | 100-250V |
Rated power: | 250W |
Application: | Outdoor show, outdoor advertising, outdoor scenic parks, outdoor roofs, etc.. |
Warranty: | 1 year |
Size: | 21*34*16.5cm/27cm (L*W*H) Net Weight: 10kgs |
carton Packing : | 45*31*22cm Gross Weight: 11kgs |
2IN1 carton: | 36*33*49cm 15kgs |
flightcase size: | 45*36*23cm Gross weight: 16kgs |
Copyright © Guangdong Knight Photoelectric Technology CO.,LTD. All Rights Reserved - Privacy policy