Features:
1. Private model products
2. The sealing level reaches the IP54, and the first floor is completely sealed. In the use, the dust and smoke oil can be avoided into the chassis, so that the life and brightness of the extended laser can be extended.
3. The heat dissipation layer is on the 2nd floor. The overall heat sink is combined with the laser light source, and the heat dissipation area reaches 100%, which extend the life of the laser.
Laser power: | 5W [Red: 1.5W 638nm; Green: 1.5W 520nm; Blue: 2W 445nm] |
Cooling method: | the whole machine is cooled by air cooling |
Control signal mode: | TTL/analog automatic switching |
Modulation voltage: | ≦30K |
Laser divergence angle: | <1.2mrad (full angle) |
Laser spot size: | 3*6.5mm at the light outlet |
Galvanometer: | AT35S 35kpps galvanometer high-quality dielectric film reflectance >99% @45°incidence (covered wavelength: 400nm-680mm) |
Scanning angle: | up to 60° |
Laser service life: | ≥10000 hours (maintain the test results in a constant temperature environment) |
IP rate: | IP54 |
Control mode: | SD (built-in more than 200 effects), sound control, automatic operation, DMX 18/27 channels (with RDM), master/slave mode, ILDA software control |
Working temperature: | -10C-45°C |
Voltage: | 100-250W |
Rated power: | 100W |
Applicable: | stage, DJ, event disco, club, bar, etc |
Warranty: | 1 years |
Size: | 21*25*16.5cm /22cm (L*W*H) |
Net Weight: | 5.5kgs |
Carton Packing: | 34*31*22cm |
Gross Weight: | 6.5kgs |
2IN1 carton: | 36*33*49cm 15kgs |
flightcase size: | 34*36*23cm 11kgs |
Copyright © Guangdong Knight Photoelectric Technology CO.,LTD. All Rights Reserved - Privacy policy