Max-15 31w rgb laser light

Features:
1. Private model products
2. The sealing level reaches the IP54, and the first floor is completely sealed. In the use, the dust and smoke oil can be avoided into the chassis, so that the life and brightness of the extended laser can be extended.
3. The heat dissipation layer is on the 2nd floor. The overall heat sink is combined with the laser light source, and the heat dissipation area reaches 100%, which extend the life of the laser.4. Build in An2 AI Show Software
5.Build in Genuine FB4 Optional

Laser Power:	31W [Red: 9W 638nm; Green: 10W 520nm; Blue: 12W 445nm]
Cooling method:	The laser is cooled with TEC, and the whole machine is cooled by air cooling
Control signal mode:	TTL/analog automatic switching Modulation voltage: ≦100K
Laser divergence angle:	<1.2mrad (full angle)
Laser spot size:	5*6.5mm at the light outlet
Galvanometer:	AT50LB 35kpps galvanometer high-quality dielectric film reflectance >99% @45°incidence (covered wavelength: 400nm-680mm)
Scanning angle:	up to 60°
Laser service life:	≥10000 hours (maintain the test results in a constant temperature environment)
Laser class:	Class IV
IP rate：	IP54
Control mode:	American pangolin FB4 control panel, automatic operation, DMX, master/slave mode, ILDA
Back control:	LCD screen, network in/out, 3-pin 512 in/out, DB25 in/out, key switch, remote in/out, power in/out, fuse
Working temperature:	-10C-45°C
Voltage:	100-250V
Rated power:	380W
Applicable:	Outdoor show, outdoor advertising, outdoor scenic parks, outdoor roofs, etc.
Warranty:	2 years
Size:	3036.520/32.5cm (LWH)
Net Weight:	19kgs
Carton Packing:	514130cm
Gross Weight:	25kgs
Flightcase size:	624836cm
Gross weight:	37KGS
Pelican case ：	6348.530cm
Gross weight:	37KGS