R-20 31w rgb laser light show

Features:
1. Private model products
2. The sealing level reaches the IP65
3. The heat dissipation layer is on the 2nd floor. The overall heat sink is combined with the laser light source,
and the heat dissipation area reaches 100%, which extend the life of the laser.
4. Build in An2 AI Show Software
5.Build in Genuine FB4 Optional

Laser power:	30W [Red: 9W 638nm; Green: 10W 520nm; Blue: 12W 445nm]
Cooling method:	The laser is cooled with TEC, and the whole machine is cooled by air cooling
Control signal mode:	TTL/analog automatic switching Modulation
modulation voltage:	≦100K
Laser divergence angle:	<1.2mrad (full -angle)
Laser spot size:	6*6.2mm at the light outlet
Galvanometer:	AT50LB 35kpps galvanometer high-quality dielectric film reflectance >99% @45°incidence (covered wavelength: 400nm-680mm)
Scan angle:	up to 60°
Laser service life:	≥10000 hours (test results in the constant temperature environment)
Laser level:	Class IV
IP rate：	IP65
Control mode:	SD (built-in more than 200 effects), sound control, automatic operation, DMX 18/27 channels, master/slave mode, ILDA software control
Back control:	AT-S5 LCD, 3-pin 512 in/out, DB25 in/out, power in, fuse
Work temperature:	-10C-45 ° C
Voltage:	100-250V
Rated power:	450W
Application:	Outdoor show, outdoor advertising, outdoor scenic parks, outdoor roofs, etc..
Warranty:	2 year
Size:	355022/37cm (LWH) Net Weight: 26kgs
carton Packing ：	6142331cm Gross Weight: 28kgs
flightcase size:	42.56940.5cm Gross weight: 39KGS
pelican case ：	675136cm Gross weight: 38KGS